PNOZmulti

Product features:

• All available PNOZmulti base units (PNOZ m0p/m1p/m2p/m3p; with serial or Ethernet-based configuration interface) can be expanded on the left-hand side and can be connected to the fieldbus systems SERCOS III
• Can be configured using the PNOZmulti Configurator
• Data can be used for visualisation/diagnostics or for control, two-way signalling and control via fieldbus modules
• Diagnostic solution PVIS can be activated via a single click in the PNOZmulti Configurator
• Using an OPC UA server connection provided by PVIS, PNOZmulti is easily linked to the web-based visualisation software PASvisu and all variables can be imported
• Connect the operator terminals PMIvisu for an overall, integrated diagnostic and visualisation solution
• Transmission rate: max. 100 MBit/s
• Connection to fieldbus via RJ-45 connector
• Status indicators via LEDs
• Max. 1 fieldbus module can be connected to the base unit
• Connection to the base unit using jumpers on the back of the unit
• Dimensions (H x W x D) in mm: 94 x 22.5 x 114
• Approvals: CE, cULus Listed, EAC (Eurasian), CCC

Configurable, safe small controllers PNOZmulti – fieldbus module Sercos III, PNOZ mc10p, subscriber (Slave)
The configurable safe small controllers bridge the gap between classic safety relays and large programmable control systems. Use the safe controllers PNOZmulti mainly to implement multiple safety functions up to PL e/Cat. 4/SIL CL 3. Functional safety to protect man and machine is thus achievable both simply and flexibly. The software tool PNOZmulti Configurator will convince you with its simple operation: install, open, work intuitively. The range of fieldbuses and communication possibilities are a major benefit of PNOZmulti. It allows the system to be used independently of the higher-level operation control system. A wide selection of expansion modules ensures maximum flexibility and safety for your application. Input and output modules, motion monitoring modules and link modules are available.